How do Qualanod inspections work and how does that benefit customers?

Andrew Robinson
Andrew Robinson
, 
Head Of Sales

Monday, November 16, 2026

Qualanod international quality label for anodising architecture over a blue-tinted anodised aluminium facade grid

A continuous regime of inspections is at the heart of the quality standards which define the Qualanod mark. Thorough, regular testing of both products and operational procedures gives architects, developers and specifiers the confidence they need to specify the right anodised aluminium finish on their project.

How does the Qualanod testing process work?

The testing and performance monitoring process is what turns Qualanod from a paper certificate into a mark of quality that is trusted around the world.

Qualanod has awarded more than 200 licenses to anodised aluminium manufacturers around the world. These companies are distributed across 44 countries in Europe, Asia, Africa and North America and are all monitored by:

  • A network of testing institutes
  • Inspectors who have long years of experience with the anodising process
  • National Associations with local responsibilities to uphold quality

Inspections are carried out on a regular basis as follows:

  • Independent product inspections at least twice per year
  • Full plant inspection at least every two years

These inspections are carried out with no notice, so licensees have no time to prepare. That ensures the inspections see both product and plant in their real, day-to-day state and there can be no question that a manufacturer has faced a lower level of scrutiny.

What do Qualanod product inspections include?

Product quality is inspected twice a year by independent Qualanod inspectors. They will look at the following factors to determine whether a manufacturer’s product meets the quality level required to retain their Qualanod license:

  • Measurement of thickness – Using one or more of the methods identified in ISO 7599: eddy current (ISO 2360) or micro section (ISO 9220).
  • Sealing tests – Mass loss tests with and without predip, dye spot test, admittance test.
  • Appearance – Visible defects, surface texture and colour, light reflection properties.
  • Corrosion resistance – Using one of the methods specified in ISO 9227. An acetic acid salt spray test (AASS) of 1000 h. Neutral salt spray test (NSS) of 336 h following ISO 10074.
  • Resistance to wear and abrasion – Surface abrasion, abrasive wheel, abrasive jet, falling sand and Taber abrader tests.
  • Microhardness – Determined by using the Vickers microhardness method of ISO 4516.
  • Resistance to cracking by deformation – Determined by using the method specified in ISO 3211.
  • Fastness to light and UV radiation – Light fastness testing using methods specified in ISO 2135. UV radiation and heat fastness testing using methods in ISO 6581.
  • Electrical breakdown potential – Determined by one of the methods specified in ISO 2376.
  • Coating continuity – Determined by the method specified in ISO 2085.
  • Surface density – Determined by the method specified in ISO 2106.
  • Thermal craze resistance – The resistance to heat-induced crazing of an anodic oxidation coating shall be determined by placing the product in an oven heated to 50 °C for at least 30 minutes.
  • Measurement of pH – Using pH meters with a maximum deviation for pH 4 and pH7: ± 0,1 pH units.

What do Qualanod plant inspections cover?

Plant inspections include a review of processes to ensure that manufacturers are following recommended best practices. They also ensure that in-house controls are sufficient to conform to the Qualanod guidance to maintain the quality levels required.

Furthermore, they will test samples of anodised products either at the plant or at a dedicated independent testing institute to provide further proof of quality.

Between the two types of inspection, there is no aspect of the production process and finished product which is left unseen. That means when you choose a Qualanod certified anodised aluminium product, every aspect of your experience will be of the highest quality.

How to specify Qualanod approved anodised aluminium finishes

If you want to specify a Qualanod approved anodised aluminium finish for your next project, contact our team today and get your free sample. We have retained our Qualanod license for 50 years and can guarantee the highest quality products and the best possible customer service.

Get a free sample or ask a question

As a world leader in aluminium surface treatment, we offer expert guidance on selecting the right metal and anodising process for panels and sheets.‍

Silver geometric facade of a building with angled panels creating a repeating pattern.